| User | Post |
|
3:28 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Cooler Master PC International PC Modding Competition 2011
Worlds first PC Casing made of Resin and Lahar – Made by a Filipino
Check it out here: http://casemod2011.coolermaste…..7&c=2
|
|
|
3:32 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Post edited 3:36 am – July 6, 2011 by bigdaddy
sorry guys, been very busy with work for the past weeks. Anyways, heres the worklog.
This is where it all started. Wires that are being twisted, to hold the clay of our subject
putting some clay on it.
Fat terran marine, without any details ( side view) …heheh
again…. the fat Terran Marine version ( front view)
Removing the arms (front)
Removing the arms (right side)
Removing the arms ( left side )
Left Back view
putting again the whole arms
right side view
right back view
reference picture of the inspired SC2 annihilation
11 inches clay model…a little over the 2-3 inches as expected
Details of the clay and some hydrolics to follow soon……
|
|
|
3:37 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Heres another worklog
removing the hands for flexible support
finished constructing the alien zerg
Back view of the alien zerg being stepped on
another view of the alien zerg
Back view with alien zerg
as you can see, details of the terran marine is now being shown. hydrolics in the legs showing up
another detailed view at the back of terran marine.
Hopefully all the PC parts will arrive by next week 
|
|
|
3:38 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Sorry for im now using a Phone Cam, so pictures are not that clear….
again Heres again a more detailed view of Starcraft 2: Annihilation with more carvings.
it took
Well…. This is where it all Started…hahahha
From a simple drinking bottle with box on top…. to much detailed hand drawings and now….
the Clay starcraft form with box on top where i will put all the cpu components.
A more detailed look of the upcoming Starcraft 2: Annihilation
Carved a more detailed look of the terran marine stepping on the Zerg Alien
Putting more emphasis on the details of terran marine on the upper part
Heres another view with Torso, see the detailed carvings on the face of terran marine…hehe
another detailed carvings on the legs, crotch and knee of the terran marine
the whole terran marine PC Gamers Setup Casing
heres a closer look of a confused terran marine face…hehehe
a closer look at the terran marine hand carved
A picture inspiration from starcraft 2 terran marine
A closer look of the handcrafted knee of terran marine
a closer look of terran marine carved crotch, chest and head without the arms
another view of the zerg being stepped on
the actual workplace for creating the Terran clay.
Hope you like it guys.
Next Will be the Crate where I will put all the PC Materials inside including the Cooler master Product/s.
HOpefully somebody will sponsor me some pc products… ( I Wish…LoL )
Also After this clay molding, rubber molding will follow and resin materials.
This Weekend I will personally get some Volcanic Materials coming from Mount Pinatubo to make the entry more exciting.
Till my Next Post/s. Hopefully i can beat the deadline.
|
|
|
3:38 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Im not satisfied with the details yet and now applying more emphasis to the smallest part of
my project.
applying a more details on the back of Terran marine
heating it up to get the actual shape, and carve it again…..
I think i got the right curve that i wanted. also putting more details on the hose
Giving elaborated details at the back…..to make it more appealing
I think thats enough…. heres another detailed view of terran marine from the side
Putting more emphasis and details on the Airvents suit
a clear view shot from the top back view of the airvents
The poor Alien Zerg being stepped on
And now, carving some lines and holes on the arm
Finally, the finished terran marine clay product
Next is the two(2) Crates I will work on this week and wait for the two CoolerMaster Products that will arrive this Tuesday for this project.
PSU = Cooler master extreme power plus
HSF = Cooler Master Hyper 212 plus
still waiting for blessings to arrive 
|
|
|
3:39 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
after making the dimensions, heres the crate box of the terran marine. Still need to do some cutting and replacing the sides with Wire Mesh and Mini Fans
Il try to have a cooler master laser logo placed here in the center with matching led lights.
A more detailed 3D look of the crate terran marine box ( unfinished )
This weekend Il be getting some Volcanic Materials and make a base for the whole Project. The Base will be similar to one of my Mcfarlane action figure. The difference is that I will use a real Volcanic Debris / Deposits as my base.
|
|
|
3:40 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Already got 2 cooler master products just now courtesy of Sir andrew and Ms. anne.
Thanks for being so generous mam and sir.
The Cooler master GX 500W PSU and Cpu Cooler Vortex plus.
This is a little bit heavy, so a little modding will do, starting with the replacement
of housing to acrylic.
il try to replace this fan to a led fan instead.
the CPU cooler Vortex plus…. Not that expensive but serves its purpose ^_^
Will replace this too with Led Lights fan
|
|
|
3:41 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
While still waiting for some products I ordered to work on the CM products, My partner and
I decided to head to Pampanga where all volcanic materials can be found.
Some of the pinatubo volcanic debris can be seen at the bottom of this bridge in Pampanga.
no more houses in this area. all you can see are lahar and some remants of small village
this is what it looks like from the bottom side of my vehicle
The actual Volcanic ash / sand that we will be using for this project
Getting large amount of Lahar
|
|
|
3:41 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
While playing around. I decided to put side by side the actual StarCraft 2 Orginal Game.
Actual picture of Terran Marine from the Game itself…. but, hmmm…. NO Terran Marine GUN?
Well…. MIght as well build one big Terran Marine Gun. Hows This?
Hoping to get the details of the Terran marine gun. Another eye candy ^_^
Terran marine with his gun and gun shell together with the stepped on Zerg
hmmmm.. where will i put this?
Terran marine is getting lonely, thats why he needs a companion…. Manny Pacquio figurine! ^_^
|
|
|
3:42 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
well start by pouring the RTV rubber molding on top of the Zerg Clay
after pouring the RTV rubber molding
putting up a casted chalk around the RTV molding
after a couple of hours, by taking out the clay,this is what it looks like
a closer look from the inside
removing all excess rubber molding
needs to clean it thouroughly
Preparing the Secret ingredients.
mixing it up with talc
Mixing up with the Most important ingredient of all….. Volcanic Ash / Sand
mixed it with black coloring
getting ready to mix it with fibers
preparing for action
putting a hardener compound
pouring inside the rubber mold
mixing it up with fibers
filling it up
this looks more like a dead rat than zerg
After waiting for a few Minutes…..
removing the final resin cast from the rubber mold
Presenting….the Resin output of zerg
Before and after. The Resin and the Clay
Zerg now ready for Airbrush Painting…..
|
|
|
3:42 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Using the same procedure as the zerg. Heres the rubber molding of the Terran Marine
Manny Pacquiao watching every details in pure amazement ^_^
terran marine upper part rubber molding
back part
preparing the moldings as well as the volcanic ash/sand
already mixed all the materials include the volcanic ash / sand
adding an extra pint of resin and volcanic ash /sand
putting resin inside the rubber mold
Joining together the front and back side of the Terran marine mold
Sealing it up
PUtting additional Volcanic ash / sand
fill er up!
after a few hours……
getting ready to see the final Terran Marine resin output
hmmmm….as good so far….feet first ^_^
nice crotch details…
hmmm.. im satisfied with the details…..
im also satisfied with the looks at the back
Terran Resin meets the terran clay ^_^.
looking at the back portion.
removing excess resin and some flaws.
Getting Ready to paint it …….
|
|
|
3:43 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
after a thorough check, the arms are a little bit short for it to fit the 244 x 244 ECS mobo. so,
adjustments will be made quick.
heres the exact size of the ECS H57H-mus mobo.
preparing some clay
heating it up for easy carving and molding
applying the heated clay
removing excess clay
shaping it up to show more details
More pics to come…….
|
|
|
3:44 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
this is the result and some details of the revised extended Terran marine arm
front view
after applying the first primer, this is how it looks like:
front view
cleaning it up again and inspecting some flaws
well done, for now…..
the whole terran marine with 2nd primer
applying the real color of terran marine. Blue.
and now the lower part
and now the FACE…..
|
|
|
3:45 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Rebuilding and Reconstructing again the space crate to accommodate a 244 x 244mm and 170 x 170mm motherboard.
The space crate will also be made out of Resin / Fiberglass and Volcanic Debris.
|
|
|
3:46 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
working on the attachment to secure the arms to the body
painting the arms and attaching it to the terran marine body
Starting to paint the Zerg
so far so good…..
Giving more details on the Gun shot wound
and now the stepped on zerg (back)
and now the stepped on zerg (front)
putting primer on Terran Marine gun and getting ready for the actual paint
|
|
|
3:47 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
There will also be a light post at the back of the crate for support. it will be seen soon…..
- ayokis
- Aerogate Geek
-
- Posts: 29
- Joined: Thu Apr 14, 2011 11:11 am
- Location: Philippines
|
|
|
3:48 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
While waiting for the Resin / Volcanic Material Case. I would like to present
the Products I will be using for this Project. Thank you to all who supported ^_^
CM GX 550Watts
CM Vortex plus
ECS H57H-MUS
Low Profile Radeon 5750
Hitachi 2TB HDD
Intel I5 -750 lynfield procie
GSkill RipJaw DDR3-1333 8gb
Inside the ECS mobo box
The ECS Black series
all solid caps
Hitachi 2tb HDD
Gskill Ripjaw ddr3-1333
I need to make the load lighter, so i decided to remove the casing of the psu. warranty void.
replacing it with an acrylic psu as replacement cover
this is how it looks like, without the paper ofcourse
placing the procie
preparing the materials for CM HSF
adjusting the hsf brackets
applying the CM thermal paste
installing the CM vortex HSF
getting ready for the Gskill memory
CPU, HSF and Memory now in place
making sure that the mobo is properly working
CM heat sink fan now working
CM HSF properly installed ^_^
opening screen
The Low profile Powercolor Radeon 5750
Running it in full speed ^_^
This is where il place the PSU
and this is where il place the HDD
I might change this fan to a fast and thinner 80x80x15mm fan
|
|
|
3:49 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Since, I have finished installing all pc components. Lets get back again to the the terran marine ^_^
painting some of the details on the Terran Marine
hoping the get the right colors……
|
|
|
3:50 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
The Final Version of SC2: Annihilation
putting more details and painting the first made SC2 terran marine annihilation
putting more details on the zerg
putting more details at the back
more details again at the back
and the middle part of terran
and this hand will serve as the support for the space crate
planning to put the board
emulating the zerg scratches by using a real chicken feet
applying it on the front cover of the space crate
this is how it looks like
putting inside the motherboard
laying everything inside
resting the mobo inside the space cm set
making an acrylic bracket for the psu
something like this:
need to check if the pc system really works
yup its all working….
putting all the parts inside
making sure that its properly connected
securing the hard disk
securing the bracket for the psu
putting the nzxt led lights
finishing the led lights
and testing it with CM psu
working space age cooler master sc2 inspired pc
putting up the top cover of the space crate
Uploading more…….
the front space crate with cooler master logo and led temperature monitor
another view of the front crate cm space crate with zerg scratches
right side of the crate
looking inside the crate with ecs logo
power color logo on the side
roccat logo and roccat headset
and roccat keyboard and mouse to complement the whole gaming experience
back portion
terran marine holding the finished space crate pc
lower part of terran marine with roccat gaming peripherals
Presenting the CM stacraft 2: Annihilation space age crate
Final Picture ( 1 hr remaining, beating the Deadline )
|
|
|
3:53 am
July 6, 2011
|
bigdaddy
| | |
| Admin
| posts 152 | |
|
|
Heres the final Casing being won 2nd Place in the 2011 MSI PC modding Competition SM North Edsa, Philippines.
|
|
Login 
Register 
Search 
Home
Print this Post 
Topic RSS 
